Restart The Machine; Maintenance; General Safety Instructions For Maintenance; General Cleaning: After Every Operation - Fast & Fluid Management SK550 1.1 Manual

Operator manual
3.2.10

Restart the machine

1. Set the main switch to the off position.
2. Wait 30 seconds.
3. Turn on the machine. See § 3.2.1.
3.3

Maintenance

3.3.1

General safety instructions for maintenance

3.3.2

General cleaning: after every operation

1. Clean the machine with a cloth and remove all spilled paint or
other liquid.
3.3.3

Periodic maintenance: weekly

1. Remove all spilled paint from the machine.
2. Grease the spindles.
3.3.4

Periodic maintenance: monthly

1. Remove all spilled paint and dirty grease from the machine.
2. Add new grease.
3. Grease the sliding parts.
SK550 1.1
Note
After the reset, the machine is on and initiated
when the display shows the shake times.
WARNING
Check the MSDS of the colorants about
personal protection measures required for
handling the colorant.
CAUTION
Do not use cleaning agents based on organic
solvents to clean the machine.
15
V. 2.0