Agilent Technologies 54600 Series Programmer's Manual page 87

Programmer's Quick Reference
Commands and Queries
Command Query
n/a *IDN?
n/a *LRN?
:MASK:CREATe n/a
:MASK:DATA :MASK:DATA?
:MASK:DESTination :MASK:DESTination?
{TRACe | PRINter}
:MASK:FAILmode :MASK:FAILmode?
{IN | OUT}
:MASK:INCRement :MASK:INCRement?
{ON | OFF}
:MASK:NUMBer :MASK:NUMBer?
<number>
:MASK:POSTfailure :MASK:POSTfailure?
{RUN | STOP}
:MASK:SAVE :MASK:SAVE?
{ON | OFF}
n/a :MASK:STATistics?
:MASK:TEST :MASK:TEST?
{ON | OFF}
:MASK:TOLerance :MASK:TOLerance?
<value>
n/a :MEASure:ALL?
:MEASure:DEFine DELay :MEASure:DEFine? DELay
<edge1>,<edge2>
:MEASure:DELay :MEASure:DELay?
:MEASure:DUTYcycle :MEASure: DUTYcycle?
8–10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Options and Query Returns
HEWLETT-PACKARD,<model>, 0, X.X
<model> ::= the model number of the instrument
<X.X> ::= the software revision of the instrument
<learn_string> ::= a maximum of 218 bytes of data in IEEE 488.2 # format
n/a
<header> ::= block header that contains the ASCII characters
#8000998
and is sent prior to the data.
<mask_data> ::= 998 bytes of data that represent the currently
selected
mask template.
{TRACe | PRINter}
{IN | OUT}
{ON | OFF}
<number> ::= memory (1 or 2)
{RUN | STOP}
{ON | OFF}
<compares, failures, failure %> ::=
current number of mask tests performed
number of failures detected
percentage of failures
{ON | OFF}
<value> ::= the tolerance used when creating a mask template.
The entered value can be from 0.00 to 20.0 percent.
<value list> ::=
<FREQ result>, <PERIOD result>, <+ WID result>, <- WID result>,
<RISE result>, <FALL result>, <VPP result>, <DUTY CYCLE result>,
<VRMS result>, <VMAX result>, <VMIN result>, <VTOP result>,
<VBASE result>, <VAVG result>, <VAMP result>, <Vovershoot result>,
<Vpreshoot result>
<result> ::= individual measurement results in NR3 format
<edgeN> ::= the edge selection for channels 1 and 2.
N is the selected edge number (1 to 5).
<return_value> ::= floating point number delay time in seconds in NR3
format
<return_value> ::= ratio of positive pulse width to period in NR3 format