Agilent Technologies 54600 Series Programmer's Manual page 83

Programmer's Quick Reference
Commands and Queries
Command Query
:CHANnel<n>:PROBe :CHANnel<n>:PROBe?
<attenuation>
:CHANnel<n>:PROTect :CHANnel<n>:PROTect?
{OFF | ON}
:CHANnel<n>:RANGe :CHANnel<n>:RANGe?
<range_argument>
n/a :CHANnel<n>:SETup?
:CHANnel2:SKEW :CHANnel2:SKEW?
<skew_argument>
:CHANnel<n>:VERNier :CHANnel<n>:VERNier?
{ON | OFF}
*CLS n/a
:DIGitize n/a
CHANnel<n>,
[CHANnel<n>]
:DITHer :DITHer?
{ON | OFF}
:DISPLAY:COLumn :DISPLAY:COLumn?
<number>
:DISPlay:CONNect :DISPlay:CONNect?
{ON | OFF}
:DISPlay:DATA :DISPlay:DATA?
<binary block_data>
8–6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Options and Query Returns
<attenuation> ::=
X1, X10, X100 for 51600/01/02/03
X1, X10, X20, X100 for the 54610/15/16
<n> ::=
1 or 2; an integer in NR1 format for 54600/03/10/15/16
1, 2, 3 or 4; an integer in NR1 format for the 54601/02
{OFF | ON}
<n> ::= 1 or 2; an integer in NR1 format
<range_argument> ::= Full-scale range value for channels 1 or 2 in
NR3 format, and {LOW | HIGH} for channels 3 or 4.
For 54600/01/02/03 channels 1 and 2:
CHANnel<n>:RANGe <range>; OFFSet <offset>; COUPling {AC | DC |
GND}; BWLimit {ON | OFF}; INVert {ON | OFF}; VERNier {ON | OFF};
PROBe {X1 | X10 | X100}
For 54610/15/16 channel 1:
CHANnel1:RANGe <range>; OFFSet <offset>; COUPling {AC | DC |
GND}; BWLimit {ON | OFF}; INVert {ON | OFF}; VERNier {ON | OFF};
PROBe {X1 | X10 | X20 | X100}; PMODe {AUT | MAN}; INPut {FIFTy |
ONEMeg}; PROTect {OFF | ON}
For 54610/15/16 channel 2:
CHANnel2:RANGe <range>; OFFSet <offset>; COUPling {AC | DC |
GND}; BWLimit {ON | OFF}; INVert {ON | OFF}; VERNier {ON | OFF};
PROBe {X1 | X10 | X20 | X100}; PMODe {AUT | MAN}; INPut {FIFTy |
ONEMeg}; PROTect {OFF | ON}; SKEW <skew_value>
For 54601/02 channels 3 or 4:
CHANnel<n>:RANGe {HIGH | LOW}; OFFSet <offset>; COUPling {DC |
GND}; PROBe {X1 | X10 | X100}
<skew_argument> ::= the skew value in seconds in <NR3> format
{ON | OFF}
n/a
n/a
{ON | OFF}
<number> ::= 0 through 63; an integer in NR1 format
{ON | OFF}
<binary block_data> ::= 16256 bytes of data in IEEE 488.2 # format