Download Print this page

HP ElitePOS 10TW Disassembly Instructions Manual

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP ElitePOS 10TW
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
USB Type-c cable
Include the cartridges, print heads, tubes, vent
chambers, and service stations. 2
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
2
0
0
1
0
0
0
1
0
0
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HP ElitePOS 10TW

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3: Mechanical Instructions

    12. Mechanical Instructions Step Figure Description monitor on a flat, soft and clean Preparation surface and pull up the deco cover. Unscrew the screws Remove to move the the BASE BASE ASSY.
  • Page 4 Unscrew the screws remove Remove cable the rear disconnect cover connectors remove rear cover.   Unscrew   the screws remove Remove key boards boards from rear cover. Disconnect Remove the tapes connectors and pins. and remove the tapes.  ...
  • Page 5 Remove Remove the the Mylar Mylar. Unscrew the screws to remove Remove the main the main board. board from mainframe.  ...
  • Page 6 The panel The panel  ...