Setup And Preparation - Teufel iTeufel Clock v3 Technical Description And Operating Instructions

Setup and preparation

Setup location
• Select a stable, level base.
• Make sure that the environment is
clean and free from dust.
• Avoid placing the unit close to sourc-
es of heat or in direct sunlight.
• Arrange the connector cables so that
they do not pose a trip hazard.
• Do not place any heavy objects on
top of the cables or the unit.
Connecting to a power
supply
1. Insert the small mains adapter plug
in the jack DC 5V (15).
2. Insert the mains adapter in an easily
accessible mains socket.
Remote control
A type CR2025 lithium battery powers
the remote control.
This battery is already located in the re-
mote control upon delivery and is in-
sulated with a plastic strip. Part of this
plastic strip protrudes from the battery
compartment. Carefully pull out the strip.
The remote control is now ready for use.
12
• iTeufel Clock
15
v3
Changing the batteries
1. Hold the remote control with the bot-
tom facing up.
2. Push the battery compartment cov-
er down towards the arrow and fold
it open.
3. Remove the battery and replace it
with a new one. When inserting the
battery, make sure the polarity is cor-
rect (see fi gure).
4. Fold the battery compartment cov-
er back into the closed position and
push it up.
Functionality
The remote control relays the control sig-
nals by means of infrared light. For this,
it is necessary that you point the remote
control towards the unit and no objects
are in the way.
Fluorescent and energy-saving lamps,
which are installed in the immediate vi-
cinity, may affect the functions of the re-
mote control or even disable them.