Step 3 : Connecting The Vcr - Sony SLV-SE250B Operating Instructions Manual

Step 3 : Connecting the VCR

If your TV has a PERITEL connector, see page 9.
If your TV does not have a PERITEL connector
Mains lead
to mains
: Signal flow
1
2
3
Note
• When you connect the VCR and your TV only with an aerial cable, you have to tune your TV
to the VCR (see page 11).
8
Connecting the VCR
ANTENNE SORTIE
Disconnect the aerial cable from your
TV and connect it to ANTENNE
ENTREE on the rear panel of the
VCR.
Connect ANTENNE SORTIE of the
VCR and the aerial input of your TV
using the supplied aerial cable.
Connect the mains lead to the mains.
ANTENNE ENTREE
ANTENNE
ENTREE
Aerial cable (supplied)
AERIAL
ANTENNE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
IN
ENTREE
OUT
SORTIE