Table of Contents
Advertisement
Changing menu options
1
Press MENU.
2
Press M/m to move the cursor (B) to "Advanced
options," then press OK.
3
Press M/m to move the cursor (B) to the option to change.
4
Press </, to change the setting, then press OK.
5
Press MENU to exit the menu.
Menu choices
Initial settings are indicated in bold print.
Menu option
Tape select
Auto play
Auto repeat
Auto power off
Power save
VCR Output CH
Set this option to
• T-120 when using a T-120 or shorter length tape.
• T-160 when using a T-160 length tape.
• T-180 when using a T-180 or longer length tape.
For details, see page 46.
• ON to start playback automatically, when you insert a tape
with its safety tab removed.
• OFF to turn off Auto play. You need to press H PLAY to
start playback, even if you insert a tape with its safety tab
removed.
• ON to play back a tape repeatedly. The VCR rewinds a tape to
the beginning and restarts playback automatically.
• OFF to turn off Auto repeat.
• 1Hr to turn off the VCR automatically one hour after the last
operation.
• 2Hr to turn off the VCR automatically two hours after the last
operation.
• OFF to set no specific time to turn off.
• ON to turn off the indicators in the display window during
standby mode to reduce the VCR's power consumption to a
minimum.
• OFF to turn on the indicators in the display window while the
VCR is standing by.
• 3CH when using channel 3 to receive the VCR signal.
• 4CH when using channel 4 to receive the VCR signal.
For details, see page 70.
ADVANCED OPTIONS
[
Tape select:
T1 2 0
[
Auto play:
ON
[
Auto repeat:
OFF
[
Auto power off:
OFF
[
Power save:
OFF
[
3CH
VCR Output CH:
Select
:
Vv
Set
: Bb
End
:
OK
Quit
: MENU
continued
Changing menu options
]
]
]
]
]
]
69
Hide quick links:
Advertisement
Table of Contents
