Sony SLV-N900 Operating Instructions Manual page 15

Hookup 1 : VCR setup
Plug the VCR into the AC outlet.
The VCR automatically presets the VCR's clock and TV channels when the VCR
is plugged into the AC outlet.
AC power cord
to AC outlet
The VCR starts presetting the clock
and channels.
When Auto preset is completed, the
current time appears in the display
window.
You have now completed VCR setup.
To change the on-screen display language to French or Spanish, see
"Step 4 : Selecting a language" on page 23.
The clock is set using a time signal provided by some TV channels. If the clock
is incorrect, or "--:--" appears in the display window, see "Using Manual Clock
Set" on page 27.
To add or disable channels manually, see "Presetting/disabling channels
manually" on page 31.
Notes
• If you connect the AC power cord before the antenna connections are completed, the channels
may be incorrectly set. If this happens, see "Step 6 : Presetting channels" on page 29.
• Do not press any buttons on the VCR or remote commander during Auto preset.
• Auto preset starts automatically only when you plug in the AC power cord for the first time
after you purchase the VCR.
• Auto preset can be performed by pressing x STOP on the VCR continuously for 5 seconds
or more with the VCR power turned off.
15
Hookups