Set Post-Drive Eq Switch For The Connected Amp Or Device; Fine-Tune The Post-Drive Eq With The Adj Control - Origin Effects RevivalDRIVE Compact Manual

Use the tables below to help you set up the RevivalDRIVE Compact for the first time with a new guitar amplifier or flat-response
device. Working through Steps 1 and 2 allows you to "set-and-forget" the POST-DRIVE EQ controls and move on to having fun
dialling in your ideal drive tone with the main controls.
Step 1: Set POST-DRIVE EQ switch for the connected amp or device
AMPLIFIER OR CONNECTED DEVICE
POWER AMP & GUITAR SPEAKER
MIXING DESK & CABINET SIMULATION
RECORDING INTERFACE & CABINET SIMULATION
BRIGHT, MID-SCOOPED GUITAR AMPLIFIER
DARK OR MID-RICH GUITAR AMPLIFIER
Step 2: Fine-tune the POST-DRIVE EQ with the ADJ control*
HOW IS THE REVIVALDRIVE COMPACT'S TONE?
TOO BRIGHT OR THIN
TOO DARK OR WOOLLY
*Please note: the ADJ control is not active when the POST-DRIVE EQ switch is in the P/AMP position.
JUST RIGHT!
POST-DRIVE EQ SWITCH POSITION
P/AMP
EQ1
EQ2
TURN THE ADJ CONTROL...
CLOCKWISE
COUNTERCLOCKWISE
LEAVE IN THIS POSITION AND ENJOY USING THE PEDAL!