Step 4: Setting Up The Vcr With The Auto Set Up Function - Sony SLV-E230UY Operating Instructions Manual

Step 4
Setting up the
VCR with the
Auto Set Up
function
Before using the VCR for the first time,
set up the VCR using the Auto Set Up
function. With this function, you can set
TV channels, guided by the sequence
indicated in the display window.
AUTO SET UP
RF CHANNEL
To cancel the Auto Set Up function
Press AUTO SET UP.
Tips
• If you want to change the language for the on-screen display from English, see page
13.
• If you want to change the programme positions, see page 14.
• To set the guide channels for VIDEO Plus +, see page 17.
Note
• Do not cancel the Auto Set Up function during the ATP operations. If you do, repeat
the step above.
8
Getting Started
Hold down AUTO SET UP on the VCR for more than three seconds.
The ATP (Auto Tuner Preset) function starts searching for all of the
receivable channels.
When no more receivable
channels can be found,
presetting stops and "SET
UP" disappears from the
display window.
AUTO SET UP