Sony SLV-E230UY Operating Instructions Manual page 33

To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press ON/STANDBY.
The indicator turns off and the VCR switches on. Remember to press
ON/STANDBY to reset the VCR after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter.
• Display tape information on the TV screen.
• Check the timer settings.
• Watch another TV programme.
Daily/weekly recording
In step 2 above, press . to select the recording pattern. Each time you press
. , the indication changes as shown below. Press > to change the indication
in reverse order.
TODAY n SU-SA (Sunday to Saturday) n MO-SA (Monday to Saturday) n
MO-FR (Monday to Friday) n SA (every Saturday) .....
n MO (every Monday) n SU (every Sunday) n 1 month later n (dates
count down) n TODAY
Tips
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a progamme in the SP mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed to
the LP mode. Note that some interference will appear on the picture at the point the
tape speed is changed. If you want to keep the same tape speed, set AUTO TAPE
SPEED to OFF in the TAPE OPTIONS menu (page 39).
Note
• The indicator flashes in the display window when you press ON/STANDBY
with no tape inserted.
33
Basic Operations