Sony SLV-675HF PX Operating Instructions Manual page 27

To watch another TV program while recording
1
Press TV/VTR to turn off the VTR indicator in the display window.
2
If the TV is connected to the VCR's LINE OUT jacks, set the TV to TV
input; if not, skip this step.
3
Select another channel on the TV.
To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on a tape
again, cover the tab hole with adhesive tape.
Tips
• To select a channel, you can use the number buttons on the remote commander.
Enter the channel number, then press ENTER.
• You can select a video source from the LINE IN jacks using INPUT SELECT.
• The display appears on the TV screen indicating information about the tape, but the
information won't be recorded on the tape.
• If you don't want to watch TV while recording, you can turn off the TV. When using
a cable box, make sure to leave it on.
Notes
• The remaining tape length may not be indicated accurately for short tapes such as
T-20 or T-30, or tapes recorded in the LP mode.
• The display doesn't appear during still (pause) mode, search mode or slow-motion
playback.
• It may take up to one minute for the VCR to calculate and display the remaining
tape length after you press DISPLAY.
SONY SLV-675HF/676HF (E) 3-856-995-11 (1)
Safety tab
27
Basic Operations