Sony SLV-675HF PX Operating Instructions Manual page 16

Step 3: Hookups (continued)
Hookup 4: VCR setup
1
Set the RF UNIT switch to
CH 3 or CH 4, whichever
channel is not used in your
area. If both are used, set the
switch to either channel.
For details, see page 40. If
you made A/V connections
(page 8), you can skip this
step.
2
Set the A/B switch to "A"
3
Press EASY SET UP on the VCR.
1 The LANGUAGE menu appears. Change the on-
screen display language to Spanish (ESPAÑOL)
or French (FRANÇAIS) if desired, and press
EXECUTE. For details, see page 17.
2 The CLOCK SET menu appears. Set the clock
and press EXECUTE. For details, see page 18.
3 The TUNER PRESET menu appears. Set
ANTENNA/CABLE to CABLE and press
EXECUTE. For details, see page 19.
4 The AUTO PRESET
starts.
4
Preset the cable box output channel (usually 2,
3 or 4). For details, see page 21.
1 Press MENU and select TUNER PRESET.
2 Enter the cable box output channel.
3 Set MANUAL SET to ADD and press EXECUTE.
16
Getting Started
SET UP
AUTO PRESET
/
EXECUTING
PLEASE WAIT
SONY SLV-675HF/676HF (E) 3-856-995-11 (1)
RF UNIT
CH3 CH4
EASY SET UP
SET UP
LANGUAGE
ENGLISH
ESPAÑOL
FRANÇAIS
NEXT : EXECUTE
CANCEL : EASY SET UP
SET UP
CLOCK SET
1 / 1 / 1 9 9 7 WE 1 2 : 0 0 AM
NEXT : EXECUTE
CANCEL : EASY SET UP
SET UP
TUNER PRESET
ANTENNA / CABLE
ANT • CABLE
SELECT : /
NEXT : EXECUTE
CANCEL : EASY SET UP
SET UP
SET UP IS DONE
.
Normal display
Cable box output channel
TUNER PRESET CH3
ANTENNA / CABLE ANT • CABLE
AUTO PRESET
MANUAL SET • ADD ERASE
AFT • ON OFF
FINE TUNING