Searching for a selected point on the tape (continued)
To cancel searching
Press · PLAY or p STOP.
To turn off the bar indication
Press DISPLAY again.
Notes
• The figure on the bar indication represents the total time length of the inserted tape
as shown below.
The total time length may not be displayed correctly for:
– tapes other than T-60, T-120, or T-160
– tapes recorded in more than one tape speed mode.
Tape type
T-60 or shorter
from T-80 to T-140
T-160 or longer
• If you move the pointer (+) on the bar indication during search, the VCR searches
for the new reset point.
• While the cursor (p) is displayed on the bar indication, the ) # FF// and 0
3 REW/? buttons on the remote commander work only for moving the pointer
(+), while the ) # FF and 0 3 REW buttons on the VCR work for normal tape
operation. Note, however, if you press these buttons on the VCR, searching is
canceled.
36
Additional Operations
Total time length
SP
LP
EP
60
120
180
120
240
360
160
320
480