Sony SLV-469 Operating Instructions Manual page 15

Hookup 4: VCR setup
1
Set the RF UNIT switch to
CH3 or CH4, whichever
channel is not used in your
area. If both are used, set
the switch to either channel.
For details, see page 45. If you made A/V connections (page 7), you can
skip this step.
2
Set the A/B switch to "A."
3
Change the on-screen display language if desired. For details, see
page 18.
1 Press MENU and select LANGUAGE.
2 Select the language, and press OK.
4
Press MENU and select TUNER PRESET. Set
ANTENNA/CABLE to CABLE. For details,
see page 19.
5
Preset the unscrambled channels into the
VCR. Select AUTO PRESET and press OK.
6
Preset the cable box output channel (usually 2, 3 or 4). For details, see
page 21.
1 Press MENU and select TUNER PRESET.
2 Enter the cable box output channel.
3 Set MANUAL SET to ADD and press OK.
RF UNIT
CH3 CH4
LANGUAGE
ENGLISH
ESPAÑOL
TUNER PRESET
ANTENNA / CABLE ANT • CABLE
AUTO PRESET
MANUAL SET • ADD ERASE
AFT • ON OFF
FINE TUNING
TUNER PRESET
ANTENNA / CABLE ANT • CABLE
AUTO PRESET
MANUAL SET • ADD ERASE
AFT • ON OFF
FINE TUNING
PLEASE WAIT
Cable box output channel
TUNER PRESET
ANTENNA / CABLE ANT • CABLE
AUTO PRESET
MANUAL SET • ADD ERASE
AFT • ON OFF
FINE TUNING
Getting Started
CH1
CH1
CH3
15