Adjusting Gain; Bypassing; Inverting Phase - URS M Series User Manual

Adjusting Gain for each Band
To adjust Gain for each band:
1. Click and drag on the desired band's knob as needed to raise or lower frequency gain. Click on the Numeric
Window and use the QWERTY keyboards up and down arrow keys or enter the value from the keyboard.
2. Click on the numeric values on the face plate to adjust gain in + or - 1 db increments. The original EQ unit
allowed gain to be adjusted in 1db increments.

Bypassing

To bypass a plug-in:
1. Click its IN button to toggle bypass state. When toggle is down (processing) the IN button is lit. When
is up (bypassed) the IN LED is dark and the plug-in Bypass switch lights.
To bypass a single EQ Band
2. Click on the Frequency Silk below that band's knob to toggle bypass state. Example – Click on the 50.
When bypassed the silk is grayed out.

Inverting Phase

To flip phase:
Click to toggle the Phase (ø) switch.
URS M series MotorCity and Vintage Cinema EQ

Adjusting Gain

9