Chapter 5: Operational Tips; Procontrol, Control|24, And Other Control Surfaces; Operational Tips - URS M Series User Manual

Chapter 5: Operational Tips

This chapter provides additional information for the URS M series MotorCity EQ plug-in including control
surface support and operational tips to help you get the most out of the URS M series MotorCity EQ.

ProControl, Control|24, and Other Control Surfaces

The URS M series MotorCity EQ fully supports Digidesign ProControl and Control|24 and other supported
control surfaces. For example, the URS plug-in on ProControl supports the EQ and DYN functions for
selecting EQ and dynamics inserts on tracks.
In addition, ProControl maps each plug-in toggle switch to the BYPASS/IN/ø switch (in the DSP
Edit/Assign area).
The following tables show the control surface labels used to indicate each EQ parameter. Use the
associated knob or fader (if your controller supports plug-in Flip mode) to adjust each parameter.
URS M series MotorCity and Vinatge Cinema EQ Control Surface Abbreviations
Control Surface
Input
50 Hz
130 Hz
320 Hz
800 Hz
2k Hz
5k Hz
12k5
Output
In-Out
Phase
To flip phase from ProControl, press BYPASS IN/ø next to LFf (Low Filter Frequency).
To toggle the Low Filter between Peak and Shelving from ProControl, press BYPASS IN/ø next
to LFg (Low Filter Gain).
To toggle the High Filter between Peak and Shelving from ProControl, press BYPASS IN/ø next
to HFf (High Filter Frequency).
On other control surfaces use equivalent toggle switches to adjust phase and Low/High Filter type.
Tip: Using Flip Mode
If your control surface supports plug-in Flip mode try it out with the URS M series MotorCity EQ! You
might find that you prefer the fixed and finite top-to-bottom mapping of frequency and gain settings along
the fader path to the less-intuitive "roll-over" behavior of most control surface rotary knobs that don't have
a fixed range. Flip mode is also convenient for the URS M series MotorCity EQ when rotary knobs are
velocity-senstive. Note that you cannot adjust toggle switches in plug-in Flip mode. (See your control
surface manual for details on how to use Flip mode).

Operational Tips

URS M series MotorCity and Vintage Cinema EQ
URS M series
MotorCity control
Input Gain
50hz Gain
130hz Gain
320hz Gain
800hz Gain
2khz Gain
5khz Gain
12.5kz Gain
Output Gain
In/Out toggle
Phase toggle
11