Panasonic CS-Z20VKEW Operating Instructions Manual page 24

How to use
Connection network using AP mode (method 2)
Ensure Wireless LAN LED is ON. Press and hold the Wireless LAN
1
seconds until "1" is shown on the remote control.
Press until "2" is shown on the remote control and press
conditioner.
Copy the password for later use. Select "Panasonic-CS-wirelessAP" from smartphones
2
Wireless LAN setting and enter the copied password. Return to "Panasonic Comfort
Cloud" app.
Select the following SSID from the
network list in the wireless
Copy password and next
Cancel (go back to previous screen)
24
Connection Guide
Step 1 Step 3
Step 2
If Wireless LAN LED is OFF during the connec on
setup, please enable again by pressing "Wireless
LAN" bu on once before proceeding to step 1 .
1. Press and hold "Wireless LAN" bu on for 5 secs
un l easy se ng "1" is shown.
2. Press "up" or "down" bu on un l Advance
se ng "2" is shown.
3. Point remote control to air-condi oner and
press "SET" bu on once.
4. A er step 1 ~ 3 have been done, tap"Next".
SET
CANCEL
Next
Cancel
SET
Connection Guide
Step 1 Step 3
Step 2
By changing the wireless network connec on of
smartphone to the following network.
SSID: Panasonic-CS-wirelessAP
Password: Rac8pswi
To wireless network settings of the smartphone. To wireless network settings of the smartphone.
Cancel
button for 5
pointing to the air