Cleaning - Abcon POSTSHIP Series Instruction Manual

TROUBLESHOOTING AND HELPFUL TIPS
7. THE DISPLAY BACKLIGHT COMES ON BUT CONSTANTLY BLANK, HOWEVER
SCALE BLEEPS WHEN PRESSING BUTTONS:
This could be caused by a faulty AC adapter or graphics IC chip failure. Please test
unit using a good quality set of batteries to see if that makes a difference. If it does
make a difference a new AC adapter can be sent under warranty by contacting your
supplier
8. WHEN CHANGING WEIGHING UNIT, SCALE IS SKIPPING DESIRED UNIT (i.e.
skipping g):
This indicates that either the memory IC chip has lost the program or there may be a
fault with the AC adapter. Please test unit using a good quality set of batteries to see if
that makes a difference. If it does make a difference a new AC adapter can be sent
under warranty by contacting your supplier.

CLEANING

Use a slightly damp clean cloth. Cloth must not be dripping wet.
14