ZWO ASIAIR How To Use

How to use ASIAIR with Sky-Watcher
AZ-GTI Mount

1 Preparations

Equipment Manufacturer
ASIAIR ZWO
AZ-GTi Mount Sky-Watcher
With the use of the above equipment will achieve through the App,
please go to Google Play or App Store to download and install.
In addition to the equipment listed above, a telescope, camera,
tripod, power supply, etc. are required to fully assemble and start
shooting. This guide does not cover the work of these devices, you
can refer to their instruction documents.
二、Detailed Settings
* By default, you have assembled the hardware part of the device.
Hardware Software
ASIAIR ASIAIR
Mount SynScan Pro

2.1 Switch ASIAIR WiFi Band

ASIAIR uses 5G band WiFi by default, while AZ-GTi Mount uses
2.4G, so you need to switch the ASIAIR WiFi band to 2.4G. Open the
ASIAIR App,
Press to switch to 2.4G.
ASIAIR_Dev.Fei
ASIAIR WiFi SSID is

2.2 AZ-GTi Mount WiFi Settings

Connect your mobile devices to AZ-GTi Mount's WiFi, the SSID is
SynScan
, you needn't to input password because it's an open
network.
iPhoneX iOS 12.0.1
After connecting (e.g. with
ZWO ASIAIR FAQ
which will be used later.
):