Cleaning And Maintenance Instructions - Restoration Hardware 1930S Lab Double Vanity Sink Assembly Instructions Manual

1 9 3 0 S L A B D O U B L E V A N I T Y S I N K A S S E M B L Y I N S T R U C T I O N S
3. Apply a continuous bead of sealant to the top surface of rim of lavatory basin (C) where it will contact underside of stone top.
Position lavatory basin in its final location, upside down on underside of stone top. Overflow of lavatory basin should be on
same side as pre-drilled faucet holes on stone top.
4. Place four "L" brackets (G) with long sides over the lavatory basin rim.
5. Insert screws (I) through washers (H) and "L" brackets. Screw into calk-in anchors with screwdriver. (See Illustration.)
(Do not over-tighten.) Insure that lavatory basin is securely attached to stone top.
6.
Using two people, turn stone top with attached basin over and position carefully on top of vanity base.

Cleaning and Maintenance Instructions:

Avoid abrasive and harsh chemical cleaners.
To maintain and protect luster of vanity sink components, Restoration Hardware Bathroom Cleaning Products are
recommended.
Restoration Hardware natural stone tops have a honed finish and hand-polished edges. They are sealed twice before shipment with
inert silicone sealant. For cleaning and maintenance, Restoration Hardware Stone Care Products are recommended. To maintain
your natural stone top, reseal it once a year.
page 7