Advertisement
15557_Ins_NEMA
44 x 20 x 8 Enclosure - Small & Large Backplate Hole Location/Guide
Figure 4:
BAPI 44 x 20 x 8 enclosure
showing Bracket Cable Guides,
Small & Large Backplates, Panduit
Wire Duct and Snaptrack.
Backplate mounting
studs, 4 typical per
Backplate
BP185X285 Large
Backplate
Holes for controller
mounting
Row of holes for TRK18
Snaptrack
TRK18 Snaptrack
Built In Divider
TRK18 Snaptrack
for power supply or
voltage converter
BP6X185 Small Backplate
The Large Backplate (BP185X285) has punched holes to mount a variety of
accessories, see Figure 4. As shown, at the bottom of the plate, are two
rows of holes for TRK18 Snaptrack and a row for a PAN16 Panduit Wire Duct.
Along the right edge are sets of holes for up to three Bracket Cable Guides
(BCGs). If you need the BCGs on the left side, rotate and mount the plate
that way. The upper half of the plate has random holes that can be used to
mount many different types of controllers. You may add any holes you wish
to the plate.
The Small Backplate (BP6X185) has punched holes to mount a variety of
accessories. As shown, holes are available for power supply snaptrack and
user supplied transformers.
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel:+1-608-735-4800 • Fax+1-608-735-4804 • E-mail:sales@bapihvac.com • Web:www.bapihvac.com
Electronic Technician Assistant NEMA Enclosures
Specifications subject to change without notice.
Installation and Operation Instructions
Built In Divider
Holes for
additional BCG
Bracket Cable
Guides
BCG Bracket
Cable Guides
PAN16 Panduit
Wire Duct
Hole field for
customer supplied
transformer
rev.
12/9/11
3
Advertisement
