Advertisement
15557_Ins_NEMA
20 x 20 x 8 Enclosure - Backplate Hole Location/Guide
Figure 2:
BAPI 20 x 20 x 8
enclosure and the
included backplate
showing hole locations.
Row of holes for PAN16
Panduit Wire Duct
Row of holes for divider
plate
Row of holes for power
supply snaptrack
The Medium Backplate is only supplied with BAPI's 20 x 20 x
8 Enclosure and the hole pattern is shown above. Since you
may wish to rotate the enclosure for left or right door opening,
the divider plate is shipped loose.
After mounting the backplate in the orientation you desire
screw the divider to the indicated row of holes with the self-
tapping screws provided. Power supplies and customer supplied
transformers may be attached to the plate in the suggested
positions. TRK18 Snaptrack and PAN16 Panduit are accommo-
dated in the suggested positions. You may add any holes you
wish to the plate.
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel:+1-608-735-4800 • Fax+1-608-735-4804 • E-mail:sales@bapihvac.com • Web:www.bapihvac.com
Electronic Technician Assistant NEMA Enclosures
Pairs of holes for BCG Bracket Cable Guides
Figure 3:
Bracket Cable Guide (BCG) installation
Specifications subject to change without notice.
Installation and Operation Instructions
Backplate
mounting studs,
4 typical per plate
Row of holes for
TRK18 Snaptrack
Hole field for
customer supplied
transformer
rev.
12/9/11
2
Advertisement
