Advertisement
Quick Links
Description and operating instruction
Industrial ETHERNET Firewall/VPN System
x
1
2
P
FAULT
STATUS
LS/DA
1
2
V.24
R
k
1
USB
2
g
V.24
EAGLE mGuard TX/TX
EAGLE mGuard FW TX/TX
h
RS2-4R
x
1
1
2
2
P
P
FAULT
FAULT
RM
STATUS
0 1
LS/DA
RM
1
2
V.24
RING
R
V.24
k
DA
1
1
USB
LS
2
DA
2
LS
g
DA
3
LS
DA
4
LS
V.24
EAGLE mGuard TX/MM SC
EAGLE mGuard TX/SM SC
EAGLE mGuard TX/LH SC
EAGLE mGuard FW TX/MM SC
EAGLE mGuard FW TX/SM SC
EAGLE mGuard FW TX/LH SC
Hirschmann. Simply a good Connection.
x
1
2
P
FAULT
STATUS
LS/DA
1
2
V.24
R
k
1
USB
2
g
V.24
EAGLE mGuard MM SC/TX
EAGLE mGuard FW MM SC/TX
x
1
2
P
FAULT
STATUS
LS/DA
1
2
V.24
R
k
1
USB
2
g
V.24
EAGLE mGuard MM SC/MM SC
EAGLE mGuard MM SC/SM SC
EAGLE mGuard MM SC/LH SC
EAGLE mGuard FW MM SC/MM SC
EAGLE mGuard FW MM SC/SM SC
EAGLE mGuard FW MM SC/LH SC
EAGLE mGuard
The industrial firewall/VPN system
– EAGLE mGuard TX/TX
– EAGLE mGuard TX/MM SC
– EAGLE mGuard TX/SM SC
– EAGLE mGuard TX/LH SC
– EAGLE mGuard MM SC/TX
– EAGLE mGuard MM SC/MM SC
– EAGLE mGuard MM SC/SM SC
– EAGLE mGuard MM SC/LH SC
– EAGLE mGuard FW TX/TX
– EAGLE mGuard FW TX/MM SC
– EAGLE mGuard FW TX/SM SC
– EAGLE mGuard FW TX/LH SC
– EAGLE mGuard FW MM SC/TX
– EAGLE mGuard FW MM SC/MM SC
– EAGLE mGuard FW MM SC/SM SC
– EAGLE mGuard FW MM SC/LH SC
in the following called EAGLE mGuard,
authenticates, validates and ensures that
the communication within the production
networks remains confidential, also beyond
the boundaries of the company.
– Interfaces:
depending on the type up to two 10/100
MBit/s twisted pair (TP/TX) ports (RJ45
socket) and/or up to two 100 MBit/s FX
ports (multimode, singlemode or
longhaul) with DSC connectors and addi-
tionally one V.24 interface for external
management or modem connection and a
USB interface.
– Network modes:
• Multi Client Transparent Mode
(MCT Mode), default setting
• Single Client Transparent Mode
(SCT Mode)
• Router Mode
– Firewall (FW)
– ARP Limiter
– Redundancy support
– ACA 11 and ACA 21-USB support
– Management: HTTPS, SNMPv3, SSH
– Redundant power supply
– Temperature range: 0°C – 60°C, no fan
– Housing: can be mounted on DIN rail, IP20
The VPN versions (EAGLE mGuard TX.../
EAGLE mGuard MM...) in addition support
Virtual Private Network (VPN) functions.
In the „Manual EAGLE mGuard Manage-
ment – Industrial ETHERNET Firewall/VPN
System" you will find a detailed description
on the EAGLE mGuard.
Advertisement
Related Manuals for Hirschmann EAGLE mGuard Series
Summary of Contents for Hirschmann EAGLE mGuard Series
- Page 1 EAGLE mGuard. EAGLE mGuard FW TX/MM SC EAGLE mGuard FW MM SC/MM SC EAGLE mGuard FW TX/SM SC EAGLE mGuard FW MM SC/SM SC EAGLE mGuard FW TX/LH SC EAGLE mGuard FW MM SC/LH SC Hirschmann. Simply a good Connection.
- Page 2 Safety Guideline Password sting agreement, permit or legal relation- This device is a safety technological pro- ship. All obligations on Hirschmann arise Warning! duct. In the interest of your own safety we from the respective purchasing agreement The ventilation slits must not be...
- Page 3 EU directives at: Use only undamaged parts! Hirschmann Automation and Control GmbH These products are only to be used in Stuttgarter Straße 45-51 the manner indicated in this version of the D-72654 Neckartenzlingen ”Description and Operating Instructions”.
-
Page 4: Firewall- And Vpn Functions
6pin terminal block RS2-4R (screw locking mechanism) LED display FAULT FAULT FAULT FAULT FAULT elements STATUS STATUS STATUS STATUS LS/DA LS/DA LS/DA LS/DA V.24 V.24 V.24 V.24 Recovery button RING V.24 Port 1 and 2 TX (RJ45 connector, autonegotiaton + autopolarity + autocrossing) or FX (SC connector;... - Page 5 1.4 SPECIFIC FUNCTIONS OF THE 1.7 CONTROLS Note: If necessary, the modem access is to F/O INTERFACE R – Recovery button be activated via PPP. For the modem access Link control The Recovery button is used to set the devi- you need an adapter connector (not inclu- According to IEEE 802.3 standard 100BASE- ce into the following states:...
-
Page 6: Unpacking & Checking
Check the individual parts for transport Warning! damage. The EAGLE mGuard equipments are designed for operation with a safety Warning! extra-low voltage.Thus, they may Use only undamaged parts! only be connected to the supply vol- tage connections and to the signal contact with PELV circuits or 3.2 ASSEMBLY alternatively SELV circuits with the... - Page 7 Fax +49(7127) 14-1551 technology and products. directly to the Hirschmann office. You can Answers to Frequently Asked Questions can find the addresses of our contract partners be found on the Hirschmann product site 5.
- Page 8 AutoConfiguration Adapter ACA 11 943 751-001 AutoConfiguration Adapter ACA 21-USB 943 271-001 Network Management Software HiVision 943 471-100 Hirschmann Automation and Control GmbH Stuttgarter Straße 45-51 D-72654 Neckartenzlingen Germany Tel.: ++49 / 1805 / 14-1538 Fax: ++49 / 7127 / 14-1551 E-Mail: ans-support@hirschmann.de...