Getting Started; Step 1 - Preparation; Checking The Supplied Accessories; Inserting Batteries Into The Remote Control - Sony KV 20VS42 Operating Instructions Manual

Getting Started

Step 1 — Preparation
Inserting the batteries
Insert two size AA (R6) batteries by
matching the + and – on the
batteries to the diagram inside the
battery compartment.
Insert the negative (–) end first, then
push in and down until the positive
(+) end clicks into position.
Notes
• With normal use, the batteries
should last about three to six
months.
• If you do not use the remote
control for an extended period of
time, remove the betteries to avoid
possible damage from battery
leakage.
• Do not use a new battery with an
old one.
• Do not use different types of
batteries.
4
Getting Started

Checking the supplied accessories

When you have taken everything out of the carton, check that you have
these items:
• Remote control
• Two size AA (R6) batteries
Inserting batteries into the remote
control
Turn the remote control
over, and remove the cover.
Check the polarities and insert the
two size AA (R6) batteries correctly.