Table of Contents
Advertisement
Indicator
Red Flashing
Red Solid
Green Flashing
Orange Solid
Orange Flashing
Inserting and Removing the Battery
To insert the battery, align the battery with the Camera handle shown in Figure
12. Firmly press the battery into the handle until it latches; the battery fits one
way.
To remove the battery from the Camera, hold the Camera upright. Squeeze the
battery latch with the other hand and pull the battery away from the handle.
Table 7. Battery Charging Status
Charger is connected to AC outlet and ready for use.
Battery charging underway.
Battery charging complete.
Battery pack is warm; charging will begin when battery
pack temperature drops.
Charging not possible. Battery and/or charger terminals
may be dirty or the battery pack is malfunctioning.
Figure 12. Inserting the Charged Battery
IR InSight Thermal Imager
Charging and Replacing the Battery
Charging Status
eiw003.eps
25
Advertisement
Table of Contents
