Advertisement
Guide
Attaching a lens
To
attach
a lens, line up the mark on
the side of the base...
Turn on the lens lighting to make sure
the lens is properly attached.
!
!
with the dot on the side of the lens.
Removing a lens
To
remove
a lens, press and hold the
lens release button...
Turn the lens clockwise until it clicks.
while turning the lens counter clock-
wise. Line up the lens dot and mark on
the base to remove the lens.
!
Advertisement
Table of Contents
Summary of Contents for Bodelin ProScope HR
- Page 1 Guide Attaching a lens attach a lens, line up the mark on with the dot on the side of the lens. Turn the lens clockwise until it clicks. the side of the base... Removing a lens while turning the lens counter clock- Turn on the lens lighting to make sure remove a lens, press and hold the...
- Page 2 Focus When the lens tip is fully extended, or You can adjust each lens to a 1/2 inch When using the ProScope HR at Dis- counter clockwise, the focal point is at distance from the object by turning tance View, focus may be difficult to...
- Page 3 Guide Adapting your old microscope into a digital microscope. Your old microscope. Remove the ocular or eyepiece. On Depending on if your microscope has binocular models this would be the a C (camera) mount or not, you may left ocular. need to use one or both adapters.
- Page 4 Guide You simply thread the C-mount and connect them to the ProScope HR Now your ProScope HR receives the adapter to the Lens Tube adapter... like you would any ProScope HR lens. image from your microscope and you can see it on your computer screen using our ProScope HR software.
Need help?
Do you have a question about the ProScope HR and is the answer not in the manual?
Questions and answers
Hi, I've managed to not align (200) lens on ProScopeHR correctly. need to troubleshoot as to how I can possibly remove it.