Dell Vostro 14–3468 Owner's Manual page 66

Option
SMART Reporting
USB Configuration
Audio
Unobtrusive Mode:
Miscellaneous Devices
Table 9. Video
Option
LCD Brightness
Table 10. Security
Option
Admin Password
System Password
Internal HDD-0 Password
66 Järjestelmän asennusohjelma
Description
This field controls whether hard drive errors for integrated drives are reported during system
startup. This technology is part of the SMART (Self-Monitoring Analysis and Reporting
Technology) specification. This option is disabled by default.
• Enable SMART Reporting
This field configures the integrated USB controller. If Boot Support is enabled, the system is
allowed to boot any type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
• Enable Boot Support
• Enable External USB Port
NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of
these settings.
This field enables or disables the integrated audio controller. By default, the Enable Audio
option is selected. The options are:
• Enable Microphone
• Enable Internal Speaker
This field enables or disables all light and sound emissions in the system. By default option is
disabled.
Allows you to enable or disable the following devices:
• Enable Camera
• Enabled Secure Digital (SD) Card
NOTE: All devices are enabled by default.
Description
Allows you to set the display brightness depending up on the power source (On Battery and On
AC).
NOTE: The Video setting will only be visible when a video card is installed into the
system.
Description
Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard drive
password. Deleting the admin password automatically deletes the system
password and the hard drive password.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Allows you to set, change or delete the system password.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Allows you to set, change or delete the password on the system's internal hard-disk drive.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set