Sending Images on the Camera Automatically
With the dedicated software Image Transfer Utility 2, you can send images
on the camera to a computer automatically.
Steps on the Computer (1)
Steps on the Camera (1)
1
Connect the computer and access
point and start Image Transfer
Utility 2.
The screen to set up pairing is shown
when you follow the instructions
displayed the fi rst time Image Transfer
Utility 2 starts up.
2
Select [Auto send images to
computer].
Select [ k : Wi-Fi settings].
Select [Auto send images to
computer].
3
In [Auto send], select [Enable].
4
Select [OK].
Connecting to a Computer via Wi-Fi
431