Sony STR-DH820 Operating Instructions Manual page 38

Performing Auto Calibration
MUTING/
1
Press GUI MODE.
After "GUI ON" appears on the display
panel for a while, the GUI menu appears
on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press V/v repeatedly to select
" Settings", then press
b.
The Settings menu list appears on the TV
screen.
GB
38
3
Press V/v repeatedly to select
"Auto Cal.", then press
?/1
Input
buttons
4
Press B/b repeatedly to select
"Standard", then press
The calibration type is automatically set
to "Engineer".
GUI
MODE
V/v/B/b,
MENU
5
Press
6
The measurement starts in five
MASTER
seconds.
VOL +/–/
2
+/–
The measurement process will take
approximately 30 seconds with a test
tone.
When the measurement ends, a beep
sounds and the screen switches.
or
Note
If an error code appears on the screen, see
"Message list after Auto Calibration
measurement" (page 40).
to select "START".
or b.
.