Pond Boss DILM12B Manual

Lit waterfall spillway

Advertisement

REMINDER
CALL 1-888-755-6750
BEFORE RETURNING TO STORE.

PACKAGE CONTENTS

Part
A
Illumifalls spillway
B
C
A
WARNINGS AND CAUTIONS
WARNING
To reduce the risk of electrical shock, connect only to a properly grounded, grounding type receptacle .
Do not exceed the input voltage shown on the transformer.
Do not submerge the transformer.
To reduce the risk of fire or injury, keep lamp away from materials that may burn.
Always disconnect light from the power source before beginning any maintenance or work on the light.
Inspect cord for damage before installation and/or maintenance. Replace the entire light/transformer
assembly if damage is found.
CAUTION
Use a proper power source as indicated on the transformer label.
Keep the cord away from high temperatures or other heat sources.
Do not lift the light or the transformer by its power cord.
This light assembly is not intended for use in swimming pools or hot tubs.
PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
Lit Waterfall Spillway
Description
Transformer
Hose clamp
ITEM #DILM12B/DILM12W/DILM14B/DILM14W
Questions, problems, missing parts? Before returning
to your retailer, call our customer service department at
1-888-755-6750, 8 a.m.-6 p.m., EST, Monday-Friday, or
email us at customercare@thepondboss.net. Or visit our
website www.thepondboss.net.
Quantity
1
1
1
B
C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DILM12B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Pond Boss DILM12B

  • Page 1 Lit Waterfall Spillway ITEM #DILM12B/DILM12W/DILM14B/DILM14W Questions, problems, missing parts? Before returning REMINDER to your retailer, call our customer service department at CALL 1-888-755-6750 1-888-755-6750, 8 a.m.-6 p.m., EST, Monday-Friday, or BEFORE RETURNING TO STORE. email us at customercare@thepondboss.net. Or visit our website www.thepondboss.net.
  • Page 2 PREPARATION Before beginning assembly or operation of product, make sure all parts are present. Compare parts with package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. •...
  • Page 3 5. Connect the tubing to the inlet of the spillway using the adapter. Connection method (a) Slip the hose clamp on to the tubing but do not tighten it. Fig. 5 NOTE: The spillway has two ports to install the inlet. For installing with this kit, using connection (a) is preferred.
  • Page 4 8. This unit also can be used in new and existing ponds and is an ideal way to add color to a waterfall. For existing ponds Weir Tubing with a waterfall simply re-plumb the tube/pipe that discharges into the existing waterfall and place the lit spillway at the top of the waterfall insuring that the unit is level.
  • Page 5 12. Connect the tubing to the pump and place it in the tub. Fig. 12 Fig. 12 13. Fill the tub with water. Fig. 13 Fig. 13 14. Connect the spillway to the transformer by pushing the plug into the transformer socket until it is firmly seated.
  • Page 6 16. Connect the pump to a proper power source. Fig. 16 GFCI Fig. 16 CARE AND MAINTENANCE – ILLUMIFALLS SPILLWAY • Clean the spillway regularly depending upon the environment in which it is operated. Clean the spillway when it is visibly soiled or when a drop in performance is detected. •...
  • Page 7 This warranty period begins on the date of purchase by the original purchaser. Unless otherwise specified all pond boss® electrical products are warranted to the user against defective material and workmanship, under normal working conditions for 1 year from the date of purchase.

This manual is also suitable for:

Dilm12wDilm14wDilm14b

Table of Contents