Getting Started - LeapFrog Go-with-Me ABC Backpack Parents' Manual

GETTING STARTED

BATTERY INSTALLATION
Make sure the unit is turned OFF.
1.
2. Locate the battery cover on the
bottom of the unit.
3. Use a screwdriver or a coin to loosen
the screw and open the battery cover.
4. Install 2 new AA (AM-3/LR6) batteries
into the battery box as illustrated.
(The use of new alkaline batteries
is recommended for maximum
performance.)
5. Replace the battery cover and tighten
the screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
4