Chapter 4 Disassembly For Repair - RCA BR200D-U1 Service Manual

The radio is a kind of sophisticated communication equipment with small and fine
mechanical structure. You should assemble and disassemble it carefully during the
maintenance process. The Instruction for assembly and disassembly are as follows:
Installing/Removing the Battery Pack
To install the battery, please place it into the groove on the top of the radio chassis about
5mm away from latch.
If the radio has the belt clip installed, you will have to press one side of the clip, to raise it
and slide the battery in proper position.
Press the battery with your fingers and push the battery until you hear a latch click, the
battery is now installed.
Removing the battery pack：
If you want to remove the battery from the radio, first press the battery latch located on the
bottom of the radio, and then press down to slide the battery about 5mm to release the
latch.
Notice:
* Do not short-circuit the battery terminals or dispose the battery in fire.

Chapter 4 Disassembly For Repair

BR200D-U1/BR300D-U1 Service Manual
13