McNeilus Street Smart Vision Extreme Operation, Service, & Parts
  1. Manuals
  2. Brands
  3. McNeilus Manuals
  4. Monitor
  5. Street Smart Vision Extreme
  6. Operation, service, & parts

McNeilus Street Smart Vision Extreme Operation, Service, & Parts

7 inch
Hide thumbs
Table of Contents

Advertisement

Quick Links

SSV Extreme 7" Monitor
O p e r a t i o n ,
S e r v i c e ,
&
P a r t s
Monitor PN: 1470026
© 2019 McNeilus Truck and Manufacturing, Inc.
Serial Numbers M19656 and above
Rev. 0519
Manual PN: 1607500

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Street Smart Vision Extreme and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for McNeilus Street Smart Vision Extreme

Summary of Contents for McNeilus Street Smart Vision Extreme

  • Page 1 O p e r a t i o n , S e r v i c e , & P a r t s Monitor PN: 1470026 © 2019 McNeilus Truck and Manufacturing, Inc. Serial Numbers M19656 and above Rev. 0519 Manual PN: 1607500...
  • Page 2 Extreme Monitor/DVR System Disclaimer: This manual must not be used to repair your vehicle. Repair information is available by calling McNeilus Customer Service at (888) 686-7278. The information in this Manual will be your guide to operation, service, and basic maintenance for this equipment.

  • Page 3: Table Of Contents

    Camera Settings ............................14 Mirror ..............................14 Jump ..............................14 Trigger Setup ............................15 Turn Signal Delay Module (Optional) ....................15 Auto Scan Time ............................ 16 Camera System ............................ 16 Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.
  • Page 4 PRECO PREVIEW RADAR SYSTEM Preco Electronics PreView Radar Systems For Front and Side Loader Applications Only ......41 ® PreView Single Sensor System for Rear Loader Application Only ..............46 ® © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...

  • Page 5: Foreword

    • Troubleshooting • Warranty • Preco PreView Radar and Sensor Systems To order a free replacement manual, contact the McNeilus Street Smart Parts and Service at 888-686-7278 or visit www.streetsmartparts.com to download a free PDF copy. Extreme 7" Monitor/DVR System...

  • Page 6: Parts And Service Locations

    Foreword Parts and Service Locations Contact your McNeilus Street Smart Parts and Service location to order parts, receive service information, or for other assistance. Contact by phone or visit www.streetsmartparts.com. We have factory owned parts and service centers near you.

  • Page 7: Safety

    Always keep this manual in a location where it is readily available for persons who operate or maintain the product. Additional copies of this manual are available from McNeilus Street Smart Parts and Service at no charge. Please contact your McNeilus parts and service location at 888-686-7278 or www.streetsmartparts.com to order parts, additional manuals, or if you have any questions about the information in this manual, this product, or safe operating procedures.

  • Page 8: Component Features

    SD card not included, but is available for purchase • Motion detection surveillance while camera through McNeilus under PN 1453457 for a 32 GB is in idle mode SDHC card. The 32 GB SDHC size SD card is the largest •...

  • Page 9: Camera Features

    3. Keep pressing the IR button on the back of the camera until the view of your hand goes black on the monitor. The IR is now turned off. Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.

  • Page 10: Installation

    Mount products) for purchase, see page ® 34. McNeilus recommends using PN 1476231 mount with one of the three possible double socket clamps (PN 1476232, 14789033, 14789034). 3. Mount the bracket using the vibration pad with the appropriate hardware. The vibration pad is placed between the mounting surface and the monitor mounting bracket.

  • Page 11: Power Accessory Harness

    NOTE: Using a directional turn signal to activate a camera will require the use of the 2-second off delay module (PN 1452176). Camera Harness Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.

  • Page 12: Camera Connection Pin Assignment

    Pin Assignments: Pin 1 = GND (Ground) Pin 2 = +12V (Power) Pin 3 = Video Pin 4 = Audio Connection Diagram © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...
  • Page 13 If your existing monitor has a serial number break of M20116 and below, you may use the supplied adapter to connect the new monitor to the existing power accessory harness. Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.

  • Page 14: Operation

    OSD Menu. Down (-) Navigates downward/to the left in the OSD Menu. Adjusts the volume down on the monitor’s speaker when not in the OSD Menu. JUMP MENU DOWN POWER © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...

  • Page 15: Remote Control For Osd Menu Functions

    • In the menu mode, navigate to a function by pressing the Up Arrow and Down Arrow buttons. • Press ENTER to select a function when in the OSD Menu. Access DVR Menu with Remote Control • Press DVR, then ENTER to display the DVR Menu. Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.

  • Page 16: On Screen Display Menu Options

    OSD menu. • After 10 seconds of inactive use, the OSD menu will The MENU button MUST be pressed to accept / save automatically close. changes to settings. © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...

  • Page 17: Input Source

    • Contrast (recommended value is 16) • Color (recommended value is 16) • Tint (recommended value is 16) • Sharpness (recommended value is 30) Figure 3 Screen settings. Figure 4 LCD Setup. Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.

  • Page 18: Mode

    NOTE: Cameras D and E are toggle cameras. You cannot view cameras D and E at the same time. Figure 6 Mirror Set Up. Figure 5 Camera settings. Figure 7 Jump Set Up. Figure 8 Camera Configuration in Jump. © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...

  • Page 19: Trigger Setup

    Pin 1 = Turn Pin 2 = Ground Pin 3 Pin 2 Pin 3 = Ignition Pin 4 = Output to Camera Trigger Pin 1 Pin 4 Figure 11 Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.

  • Page 20: Auto Scan Time

    Line 3 - Blue Line 4 - Red *H1 and H2 refer to the left and right distance from the center line of the vehicle (see Horizontal Line Set Up). © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...

  • Page 21: Distance Grid On Monitor For Reverse Camera

    DO NOT START THE ENGINE UNLESS IT IS NECESSARY TO ENGAGE REVERSE GEAR. The following measurements are recommended by McNeilus. 1. Select Rear Grid Setting (Menu, Camera Settings, Rear Grid Setting). 2. Select the camera that you want to set up with a distance grid.

  • Page 22: Horizontal Line Set Up For Reverse Camera

    For each line dimension, press the down arrow to increase or the up arrow to decrease to achieve the desired movement. Press MENU to save. Dimensions move in 1/2 foot increments. © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...

  • Page 23: Distance Grid On Monitor For Alley Camera

    DO NOT START THE ENGINE UNLESS IT IS NECESSARY TO ENGAGE REVERSE GEAR. The following measurements are recommended by McNeilus. 1. Select Grid. 2. Select the camera that you want to set up with a distance grid.
  • Page 24 (see Horizontal Line Set Up) H1 is the center line of the camera image. H1 is the center line of the camera image. 4.5 ft. 4.5 ft. H1 = 0ft. 0ft. = H1 © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...

  • Page 25: Motion Detection

    Figure 13 Motion selection on Camera Settings Figure 14 Camera set up for motion detection. NOTE The MENU button MUST be pressed to accept / save changes to settings. Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.

  • Page 26: Dvr

    © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...

  • Page 27: Dvr Main Menu Options

    This setting allows you to choose which single camera's audio you want to record when more than one camera is set to record in the DVR (Figure 16). Figure 15 DVR Menu Figure 16 Audio Record Source Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.

  • Page 28: Dvr Record Source

    DVR Menu Figure 19 • Language – Changes the language of the DVR Menu/DVR settings to English, Français, or Español. • Resolution – Select the video size (low, medium, high). © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...

  • Page 29: Audio

    Schedule Record: Includes Schedule set up, Motion Record, and Continue Record. Motion Record and Continue Record by default are set-up similarly to Manual Record. Record time settings apply to Schedule Record. Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.
  • Page 30 • Length of time the DVR will record when Schedule Record is activated. Factory Mode – Yes or No to reset the DVR factory settings FW Version No. – Firmware version © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...

  • Page 31: Camera Installation

    33 for bracket options available for purchase through McNeilus Parts at 888-686-7278 or www.streetsmartparts.com. If you require a different bracket for the camera, use that bracket as a template for drilling the holes.

  • Page 32: Front End Loader

    When installing a hopper camera on a dump body truck, it is necessary to purchase an 82’ cable (PN 1431526). For reference number 9, the IR on the camera must be turned off. See page 5 for instructions to turn off IR. © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...

  • Page 33: Rear End Loader

    For reference number 10, cameras can be placed on either side of the vehicle or on both sides. For reference number 9, the IR on the camera must be turned off. See page 5 for instructions to turn off IR. Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.

  • Page 34: Autoreach

    When installing reference numbers 8 and 9, it may be necessary to purchase a 16' cable (PN 1433196). For reference number 9, the IR on the camera must be turned off. See page 5 for instructions to turn off IR. © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...

  • Page 35: Zero Radius

    When installing reference numbers 8 and 9, it may be necessary to purchase a 16' cable (PN 1433196). For reference number 9, the IR on the camera must be turned off. See page 5 for instructions to turn off IR. Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.

  • Page 36: Mixer

    For reference number 5, the IR on the camera must be turned off. See page 5 for instructions to turn off IR. IMPORTANT Do NOT get muriatic acid or any other acid on cameras when rinsing concrete from the Mixer. © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...

  • Page 37: Camera Bracket Illustrations

    Camera Installation Camera Bracket Illustrations 1483253 1140988 1483269 1395593 1260747 1260752 1428569 1145490 1431792 1143992 1408134 1235556 1486114 1150000 1260649 1408138 1166535 1484152 1484153 1408136 1321476 1178933 1483254 0084330 1494170 Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.

  • Page 38: Components For Individual Sale Components For Individual Sale

    1476232 RAM Mount, Double Socket, 1.5" Ball, 4.5"L 1489033 RAM Mount, Double Socket, 1.5" Ball, 8"L 1489034 Monitor Swivel Base Low Profile 1235561 Monitor Swivel Base Standard Plastic 1176862 © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...
  • Page 39 PreView Radar Systems Part Number ® PreView Single Sensor System Kit – ® 1479540 Front Loader and Side Loader Only PreView Single Sensor System Kit – ® 1504244 Rear Loader Only Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.
  • Page 40 2-Second Off Delay Module (Optional)* 1452176 *This module may need to be added to the turn signal circuit to retain the directional image on the monitor screen while the turn signal is activated. © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...

  • Page 41: Troubleshooting

    Troubleshooting The sequence below will help isolate a problem or malfunction and often permit a quick repair. If further assistance is required, refer to the applicable section of this manual or contact McNeilus Street Smart Vision Systems at 888-686-7278. IMPORTANT Isolate the problem before taking any corrective actions.
  • Page 42 Record Mode, select G-Sensor to determine if a rating is selected. If a Recording Rating. G-Sensor rating is selected, the SD Card will not loop (continuously record). Turn OFF for SD Card to continue loop. © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...
  • Page 43 2. If unable to access the OSD menu, the monitor may possibly be Passcode the monitor's front Main Menu locked, refer to page 22 to unlock. panel. O. Camera Displays Poor Quality (Grainy) Picture Contact Street Smart Vision Systems at 888-686-7278 Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.

  • Page 44: Warranty

    McNeilus Street Smart Parts and Service provides a one-year comprehensive warranty on this product. This McNeilus Street Smart Parts and Service product is protected for one year from the original date of purchase from McNeilus Street Smart Parts and Service against defects in material and workmanship. McNeilus will replace, at McNeilus’s sole discretion and without charge, any part which under normal and proper use...

  • Page 45: Preco Preview Radar System

    Reposition the sensor in PreView another location until nothing is detected in the zone. Figure 22 Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.
  • Page 46 2. Connect the 1483926 Monitor Adaptor/Cable between the monitor and the camera cable. 3. Plug the black Deutsch connector from the 1483926 Monitor Adaptor/Cable into the VideoLink (see Figure 24). Figure 24 1483926 Monitor Adaptor/Cable and 1483927 VideoLink © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...
  • Page 47 3. Turn on the SSV Extreme Monitor/DVR System to verify the PreView system is operational. ® NOTE The sensor mating connector is fully waterproof if Figure 27 Connect Cab Adaptor Cable (PN 1483928) to mated properly. VideoLink Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.
  • Page 48 7. Connect the other end of the red wire to the reverse light power circuit. 8. Install the buzzer into the buzzer bracket. 9. Secure the bracket in a location in the cab where it can be heard by the vehicle's operator. © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...
  • Page 49 5. The final detection zone, as viewed through the monitor, should look similar to Figure 9. The Xs indicate the points of detection of the assistant on the monitor. ~ 3 ft. (1 m) ~ 3 ft. (1 m) Figure 30 Detection Zone as viewed through the monitor. Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.

  • Page 50: Preview ® Single Sensor System For Rear Loader Application Only

    In the proposed location, temporarily attach the sensor and turn the system on to verify nothing is detected in the zone. Reposition the sensor in another location until nothing is detected in the zone. © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...
  • Page 51 2. Connect the 1483926 Monitor Adaptor/Cable between the monitor and the camera cable. 3. Plug the black Deutsch connector from the 1483926 Monitor Adaptor/Cable into the VideoLink (see Figure 33). Figure 33 1483926 Monitor Adaptor/Cable and 1483927 VideoLink Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.
  • Page 52 3. Turn on the SSV Extreme Monitor/DVR System to verify the PreView system is operational. ® NOTE The sensor mating connector is fully waterproof if Figure 35 Connect Cab Adaptor Cable (PN 1483928) to mated properly. VideoLink © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...
  • Page 53 7. Connect the other end of the red wire to the reverse light power circuit. 8. Install the buzzer into the buzzer bracket. 9. Secure the bracket in a location in the cab where it can be heard by the vehicle's operator. Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.
  • Page 54 5. The final detection zone, as viewed through the monitor, should look similar to Figure 38. The Xs indicate the points of detection of the assistant on the monitor. Approximate Pattern Figure 38 Detection Zone as viewed through the monitor. © 2019 McNeilus Truck and Manufacturing, Inc. Extreme 7" Monitor/DVR System...
  • Page 55 THIS PAGE INTENTIONALLY LEFT BLANK...
  • Page 56 w w w . s t r e e t s m a r t p a r t s . c o m 8 8 8 . 6 8 6 . 7 2 7 8...

Table of Contents

Save PDF