QuietCool IT-36002 Owner's Manual

QuietCool IT-36002 Owner's Manual

Rf wireless control

Advertisement

®
ADVANCED WHOLE HOUSE FANS
OWNER'S GUIDE
RF WIRELESS CONTROL
S EE
//
H E A R
//
F E E L
THE QUIETCOOL DIFFERENCE
1
QUIETCOOLSYSTEMS.COM

Advertisement

Table of Contents
loading

Summary of Contents for QuietCool IT-36002

  • Page 1 ® ADVANCED WHOLE HOUSE FANS OWNER’S GUIDE RF WIRELESS CONTROL S EE H E A R F E E L THE QUIETCOOL DIFFERENCE QUIETCOOLSYSTEMS.COM...
  • Page 2: Table Of Contents

    Follow Instructions - All installation and operating instructions should be followed. Water – The QuietCool system should not be used near water. If you live in a very humid climate, be sure to cover your damper box with insulation to reduce condensation.
  • Page 3: System Overview

    The QuietCool Whole House Fan RF Wireless Control is the simplest way to control your QuietCool Advanced Whole House Fan from anywhere in your home! The QuietCool RF Wireless Control allows users to set the length of time that the fan will run and set the desired speed level.
  • Page 4: Installation

    Remove the four screws that are used to mount the handy box to the QuietCool motorhead. Retain the four screws as you will be using them to attach the Hub to the QuietCool motorhead.
  • Page 5 1-speed and the fan will be on. Press the Test button again and the fan should shut off and the LED will be off. If the fan doesn’t operate as described in step 8, please check the dip switch postion. 1-888-QUIETCOOL...
  • Page 6 Two Speed Wiring (for CL-2250 to 7000 and TRI PRO-2.5 to 7.0) (see Figure B) Using a wire nut, connect the black wire from the power cord to the black wire from the Hub. Connect the white wire from the power cord and the white wire on the fan to the white wire from the Hub.
  • Page 7 Press the Test button again and the fan will switch to low speed. Press the Test button again and the fan should shut off and the LED will be off. If the fan doesn’t operate as described in step 9, please check the dip switch postion. 1-888-QUIETCOOL...
  • Page 8 Two Speed Wiring (for ES-3100, 4700, 5400, 6000, 7000, and STL PRO-3.3) (see Figure D) Using a wire nut, connect the black wire from the power cord and the black wire from the fan to the black wire from the Hub. Connect the white wire from the power cord and the white wire on the fan to the white wire from the Hub.
  • Page 9 Press the Test button again and the fan will switch to low speed. Press the Test button again and the fan should shut off and the LED will be off. If the fan doesn’t operate as described in step 9, please check the dip switch postion. 1-888-QUIETCOOL...
  • Page 10: Fan Hub Led Indicators

    Fan Hub LED Indicators Power Indicator • The Power LED indicator will always be lit when the Hub is connected to Power. • If this LED is not lit, check the power source Timer Indicator • The Timer LED indicator will light up as shown below: POWER TIMER...
  • Page 11: Pairing The Wall Switch

    If the fan comes on, this is a good location. If all the LED indicators turn on, the Wall Switch is not communicating with the Hub and you will need to find a location closer to the fan. 1-888-QUIETCOOL...
  • Page 12: Installing The Wall Switch

    Installing the Wall Switch Using your hands, slide the Wall Switch off the mounting plate. If you have an existing Wall Switch with a junction box installed, install the mounting 1 2 4 8 12 plate over the junction box using the oblong holes on the mounting plate.
  • Page 13: Frequently Asked Questions

    The RF will not interfere with other wireless or RF devices in your house. It produces its own unique RF signal that can only communicate with our RF Switch. How many switches can you connect to a single hub? You can connect up to 20 switches to a single hub. 1-888-QUIETCOOL...
  • Page 14 Why is there a medium speed if my fan is only a two speed? The RF Hub and RF Switch are universal to all QuietCool models. There are some units that feature three speeds which use the medium on the switch. As long as your DIP switch is set correctly in the hub, the switch will automatically skip over medium speed.
  • Page 15 This warranty is the only warranty extended by QC Manufacturing, Inc. to purchasers or suppliers of our equipment. QC Manufacturing Inc. disclaims all other warranties, express or implied, that arise by operation of the law. QC Manufacturing, Inc. Customer Service 43352 Business Park Dr. Temecula, CA 92590 www.QuietCoolSystems.com 951-325-6340 1-888-QUIETCOOL...
  • Page 16 QuietCool is Proudly Designed and Built in California ® ADVANCED WHOLE HOUSE FANS 1-888-QUIETCOOL 43352 Business Park Drive, Temecula, CA 92590 // PH 951.325.6340 // QUIETCOOLSYSTEMS.COM...

Table of Contents