Sony KDL-32EX721 Service Manual page 50

3) Write data for "Digital" service mode. (
Note: This procedure operation, when replaced the B board.
Note: Do not write a wrong segment or destination information in Product ID.
When the wrong setting is written, TV may not operate.
000 SEG -----------------Select JDM code information
001 DEST ---------------Select destination information
002 MODELNAME ---Select model name
004 SERIAL ------------ Can be set only once for the new board
a. Change data for each model.
b. Press "Mute", "0" on remote sequentially.
It shows red "WRITE". It indicate writing is processing.
c. After a while. Red "WRITE" disappears. Writing process is done after a while.
KDL-32/40EX720,721,723,724(AEP/UK)
"002 MODEL" category)
DIGITAL
002 MODEL
000 SEG
Write
SERVICE
I‐1
ADJUSTMENT
50