Silver Peak Hardware Reference Guide Support For product and technical support, contact Silver Peak Systems at either of the following: 1.877.210.7325 (toll-free in USA) +1.408.935.1850 www.silver-peak.com/support We’re dedicated to continually improving the usability of our products and documentation. If you have suggestions or feedback for our documentation, send an e-mail to techpubs@silver-peak.com.
Memory express) for those appliances for which the customer is authorized to make the replacement. CAUTION Silver Peak does not authorize customer to replace the single HDD or SSD in the EC-XS, EC-S, NX-700, or NX-1700. Replacing it voids the warranty. Contact Silver Peak Support for return and repair instructions.
This chapter describes how to replace a power supply for those appliances for which the customer is authorized to make the replacement. CAUTION Silver Peak does NOT authorize the customer to replace the power supplies in the NX-700 or NX-1700, or power adapters in the EC-US and EC-XS. Replacement voids the warranty. WARNING Do not open the casing of a power supply.
3. Power down, disconnect, and remove the old appliance. 4. Physically install the new [replacement] appliance. If you need to review rack mount instructions, refer to Silver Peak’s User Documentation web page 5. Cable the appliance, as directed. As needed, refer to the...
Orchestrator backs up appliances to the Orchestrator database. 3. Power down, disconnect, and remove the old appliance. 4. Physically install the new [replacement] appliance. If you need to review rack mount instructions, refer to Silver Peak’s User Documentation web page NX Series Quick Start Guide 5.
Silver Peak Hardware Reference Guide Model Specifications and Standards This section includes general and model-specific specifications for the Silver Peak appliances. Refer to the Quick Start Guides listed in the User Documentation section of http://www.silver-peak.com/Support To verify the most current VXOA host system requirements To see which hypervisors Silver Peak’s VXOA software currently supports.
Silver Peak Hardware Reference Guide Power Cords and Cable Pinouts Power Cords by Country This section includes country-specific power cord plug and receptacle specifications for the Silver Peak appliances. POWER COUNTRY APPROVALS CORD Rating PLUG RECEPTACLE Argentina IRAM 9000.098 10A / 250V...
Silver Peak offers dual-rate 1/10G optical SFP+ transceivers for operation within certain EdgeConnect appliances. These transceivers go through an internal qualification process and are customized for operations with Silver Peak software. Silver Peak recommends these transceivers for use with EdgeConnect appliances that support pluggable transceivers.
Need help?
Do you have a question about the EC-US and is the answer not in the manual?
Questions and answers