Evolve DS-100-R Product Overview

CD-DS100R-01
DS-100-R
Product
Description
Specifications
Installation
PRODUCT OVERVIEW
Wireless Recessed Door Sensor
Recessed Door Sensor
The Evolve Recessed Door Sensor is battery-powered with an extremely small form factor and
View the expanded manual:
aesthetical design. It's simple – the door sensor will send radio signals to associated Evolve
http://aeot.ec/spprt/recessed
devices within its own Z-Wave network when the main unit separates from the smaller unit. A bi-
directional mounting plate and push button allow for stress-free user installation and just like the
Evolve Wireless Sensor, this device has tamper prevention capabilities and low-battery alerts.
•
SKU: DS-100-R
•
Supported Networks:
- Z-Wave – Signal (Frequency) 908.42 MHz
•
Range: Up to 100 ft. indoors and 300 ft. outdoors.
•
Power Requirements: 2 Year Lithium Battery (CR-2)
1
• Aeotec Recessed Door Sensor
Weight: 0.48 lbs. (main body)
•
From Aeotec by Aeon Labs' Intelligence series comes
Dimensions: 2.5" H x 1.625" W x 0.75" D (main body)
the Recessed Door Sensor. Invisibly installed, it sits
within a door and its frame to provide all the
information needed by a Z-Wave system for security,
safety, and ambiance, and it does it all without altering
a room's aesthetics.
Familiarize yourself with your door sensor.
2
Familiarise yourself with your door sensor
Your Recessed Door Sensor is comprised of two parts: the larger Main Sensor and the smaller
Your Recessed Door Sensor is comprised of two parts:
Magnetic Sensor.
the larger Main Sensor and the smaller Magnetic
Sensor.
The larger Main Sensor
LED
Screw Hole
Main Sensor Z-Wave Button Hole
The Magnetic Sensor
3
Recessed Door Sensor
Quick Start
View the expanded manual:
The installation of your Recessed Door Sensor has two
http://aeot.ec/spprt/recessed
major steps: the installation of the Main Sensor and the
installation of the Magnetic Sensor. Powered by
batteries, your door sensor will use wireless technology
to talk to your Z-Wave network once installed.
Prepare the Main Sensor
The first step in installing your Recessed Door Sensor is
to activate the Main Sensor.
1. Using a slot-head screwdriver, remove the Main
Sensor's lid by pressing gently against its exposed
connector.
1
Aeotec Recessed Door Sensor
From Aeotec by Aeon Labs' Intelligence series comes
the Recessed Door Sensor. Invisibly installed, it sits
within a door and its frame to provide all the
information needed by a Z-Wave system for security,
safety, and ambiance, and it does it all without altering
a room's aesthetics.
2
Familiarise yourself with your door sensor 2. Separate the Main Sensor's two sections by first
removing its lid and then removing its internal
Your Recessed Door Sensor is comprised of two parts:
components.
the larger Main Sensor and the smaller Magnetic
Sensor.
The larger Main Sensor
3. Remove the clear battery insulator by pulling it away Main Sensor
from the Main Sensor.
The Magnetic Sensor
Screw Hole
Magnetic Sensor
LED
Screw Hole Screw Hole
Z-Wave Button Hole
A magnet in the plastic shell
3
Quick Start
The installation of yo
major steps: the insta
installation of the
batteries, your door s
to talk to your Z-Wave
Prepare the Main S
The first step in insta
to activate the Main S
1. Using a slot-head
Sensor's lid by p
connector.
Note: Ensur
2. Separate the Mai
the button h
removing its lid
components.
Install you
With the Ma
time to inlay
install the M
Before beg
position for
instructions
Installed
Positione
its magn
plate, han
Installed
least 1mm
3. Remove the clear Positione
from the Main Sens
in your do
The recta
appropria
Step 1
4. With the battery
internal componen
Prepare a
before reattaching into your
look as it did prior to
hole shou