Creating Your Own Sound Effect; Using The Timers - Sony MHC-RG295 Operating Instructions Manual

Creating your own
sound effect
You can raise or lower the levels of specific
frequency ranges, and then store the setting as
"USER" in the memory.
1
Select the audio emphasis you
want for your basic sound using
EQ, and SURROUND and

GROOVE on the unit.
2
Press EQ BAND
select a frequency band, and then
turn the MULTI JOG dial
unit to adjust the frequency level.
Repeat this for each band you want
to adjust.
Frequency band
3

Hold down EQ
"COMPLETE" appears.
The setting is stored in the memory.
4
To call up the personal sound
effect, press EQ
"USER" appears.
To cancel the sound effect

Press EQ repeatedly until "EQ OFF"
appears.

repeatedly to

on the
Frequency level
until

repeatedly until

Using the Timers

The system offers three timer functions. You
cannot activate both the Play Timer and the
Rec Timer at the same time. If you use either
with the Sleep Timer, the Sleep Timer has
priority.
Sleep Timer:
You can fall asleep to music. This function
works even if the clock is not set.

Press SLEEP repeatedly. If you select
"AUTO," the system automatically turns
off after the current disc or tape stops or in
100 minutes. Do not select "AUTO" during
Synchro Recording of a tape.
Play Timer:
You can wake up to CD, tape or tuner at a
preset time.
Rec Timer:
You can record a preset radio station at a
specified time.
Use buttons on the remote to control the Play
Timer and the Rec Timer. Make sure you have
set the clock.
1
Prepare the sound source.
Play Timer
Prepare the sound source, and then press

VOLUME +/– to adjust the volume.
To start from a specific CD track or MP3
file, create your own program (page 16).
Rec Timer
Tune in the preset radio station (page 17).
2
Press CLOCK/TIMER SET

.

Continued
19
GB