Safety Requirements; Configuring Your System; Local Viewing; Remote Viewing - ZMODO sPoE NVR system Quick Start Manual

Safety Requirements

Place your NVR in a well-ventilated area.
Do not place any objects on top of your NVR.
Try to keep your NVR in a cool operating temperature.
Do NOT move or shake the NVR while operating, or else the hard drive will
be damaged.
Use a surge protector to protect the NVR from shortages.
Use only the provided power adapters with your products.
If water or any liquid comes into contact with the NVR, unplug it immediately
and contact Zmodo support.

Configuring your system

3

Local Viewing

If you are accessing your system locally, please make sure that you have
properly connected your system (Part 2), and power on your NVR. Once you
have logged into your NVR interface, please wait 3-5 minutes for your
system to automatically add the cameras.

Remote Viewing

You can access your system from any location with a working internet
connection. In order to set up remote viewing. Follow the steps below to
configure your system for remote viewing:
Connect your mobile device to the same WiFi network that your NVR is
1
connected to.
Download and install the "Zmodo" app from Google Play or the App
2
TM
Store (compatibility: iOS 9.0+ or Android 4.0+). Launch the app and
sign up for a free Zmodo account. All of your devices will be bound to this
account.
Network Requirements:
3
720p cameras: Requires at least 1mbps upload when live viewing or 2mbps
upload when using the Cloud Service for each camera.
1080p cameras: Requires at least 2mbps upload when live viewing or
4mbps upload when using the Cloud Service for each camera.
TM
Zmodo
4
TM