Disassembling The Trailer From Its Shipping Configuration - Polaris OHT4 Assembly Manual

So let's go through the assembly process step by step below, these first steps are really removing it from it's shipping configuration,
then the actual assembly process will start once it is laying on its tires on the ground:
Step 1:
Remove the tongue, by removing the
bolt attaching it to the rear deck,
then just lift it off the two bottom
supports and lay it aside for
assembly onto the trailer later.
Then remove the Spare Tire &
Wheel and set aside.
Step 2:
Remove the bolts that attach the
rear deck to the main deck and lay
the rear deck aside for later
installation onto the main deck.

Disassembling the trailer from its shipping configuration:

2