Download Print this page

Akiyama Kuro User Manual

Hide thumbs Also See for Kuro:

Download this manual

User Manual

Cross 2.4

Need help?

Do you have a question about the Kuro and is the answer not in the manual?

Page 1 User Manual Cross 2.4 ...
Page 2 KURO / K2. User Manual Cross 2.4 BEFORE USING KURO OR K2 WITH MIXVIBES SOFTWARE CROSS 2.0, BE SURE YOU HAVE AVAILABLE THE LATEST FIRMWARE VERSION VIEWING YOUR CURRENT FIRMWARE VIEWING YOUR CURRENT FIRMWARE FOLLOW THE INSTRUCTIONS BELOW: FOLLOW THE INSTRUCTIONS BELOW: 1- TURN ON THE DEVICE.
Page 3: Midi Implementation
KURO / K2. User Manual Cross 2.4 MIDI IMPLEMENTATION 1. Eject 16. Sample mode 2. Half Loop & Double Loop 17. Fine Bend (Shift=Confirm / Discard tap) 3. Active Deck 18. Tap 4. Browse / Tree (press= Expand / Collapse) 19.
Page 4 KURO / K2. User Manual Cross 2.4 1. EJECT 8. SLIP MODE Delete the track loaded on the Player. Press NEXT TRACK to activate/deactivate the SLIP mode 2. HALF LOOP/ DOUBLE LOOP Halve or double the length of manual loops. Automatic loops length can be doubled or halved using the “26.
Page 5 KURO / K2. User Manual Cross 2.4 15. HOT CUES / SAMPLES These buttons allow the user to create and use up to 4 location points in the track. To store a location point, simply move to the position on the track that you want to mark and press the desired locator.
Page 6 This button determines the length of Automatic Loop. We can determine the length of the Loop by pressing the buttons KURO /K2 loop green leds will light. When you select the AUTO LOOP button (22) the loop length determined will be formed.
Page 7 C/ Praga, nº 11. Pol. Cova Solera 08191. Rubí - Barcelona (Spain) www.akiyamadj.com info@akiyamadj.com ...