Cisco Catalyst 2960-X Series Hardware Manual page 10

7 STACK LED
7
Only on switch models that support PoE.
System LED

RPS LED

IRPS LED

Master LED

Port LEDs and Modes

STACK LED

Console LEDs

Ethernet Management Port LED

System LED
Color
Off System is not powered on.
Green System is operating normally.
Blinking green POST in progress.
Amber System is receiving power but is not functioning properly.
Blinking amber System is sleep mode.
Table 3 System LED
RPS LED
The RPS LED is only available on switch models that have an RPS port . This is available
only on the Catalyst 2960-X switches.
Note
RPS is not supported on the Catalyst 2960-X 24PSQ-L switches.
Color
Off RPS is off or not properly connected.
Green RPS is connected and can provide back-up power.
Blinking RPS is connected but is unavailable. It is providing power to
green another device (redundancy has been allocated to the other device).
Amber The RPS is in standby mode or in a fault condition. See the RPS
documentation.
Blinking The power supply in a switch has failed, and the RPS is providing
amber power to the switch (redundancy has been allocated to this device).
Table 4 RPS LED
14 Port LEDs
8
Only on switch models that support stacking.
System Status
RPS Status