Sony MHC-GS100 Operating Instructions Manual page 13

7
Press M.
The character you selected in step 6 stops
flashing and the cursor shifts to the right.
8
Repeat steps 6 and 7 to complete the
entire title.
If you make a mistake
Press m or M until the character you
want to change flashes, then repeat steps 6
and 7.
To erase a character
Press CLEAR while the character is
flashing. You cannot insert characters.
9
Press ENTER to complete the labeling
procedure.
To cancel labeling
Press MENU.
Tip
When you replace a disc with a CD-TEXT disc, the
disc title of the CD-TEXT disc is automatically
restored. The disc title of the CD-TEXT disc is no
longer stored (disappears) when the disc is removed.
Note
The Disc Memo stores the number of the slot in
which the CD was loaded. Re-enter the Disc Memo
when loading a new CD into that slot.
Checking the Disc Memos
1 Press CD to switch the function to CD.
2 Press MENU.
3 Press . or > repeatedly until
"NAME CHECK" appears, then press
ENTER.
4 Turn DISC SELECT to select the Disc
Memos stored in the system memory
between 01 and 60, then press MENU.
To check the current Disc Memo
Press DISPLAY repeatedly until the Disc
Memo appears in stop mode.
Erasing a Disc Memo
1 Press CD to switch the function to CD.
If "SHUF" or "PGM"appears, press PLAY
MODE repeatedly until both disappear.
2 Press MENU.
3 Press . or > repeatedly until "NAME
ERASE" appears, then press ENTER.
4 Turn DISC SELECT to select the disc
number with the Disc Memo you want to
erase, then press ENTER.
Erasing all Disc Memos of all
discs
1 Press CD to switch the function to CD.
If "SHUF" or "PGM"appears, press PLAY
MODE repeatedly until both disappear.
2 Press MENU.
3 Press . or > repeatedly until "ALL
ERASE" appears, then press ENTER.
4 Press ENTER again until "COMPLETE"
appears.
US
13