Connecting A Vcr - Sony MHC-GRX5 Operating Instructions Manual

Connecting optional AV
components (continued)
Connecting a super woofer
speaker (except for MHC-R700 /
RX77S / RX77 (European models))
You can connect an optional super woofer
speaker.
To super woofer
Connecting the surround speakers
(MHC-RX77 (Canadian model)
only)
Connect the speaker cords from the surround
speakers to the appropriate SURROUND
SPEAKER jacks. Connect the solid cords to
the red jacks and connect the striped cords to
the black jacks.
Keep the speaker cords away from the
antennas to prevent noise.
To surround
10
speaker (R)
To surround
speaker (L)
Notes
• Do not place the surround speakers on top of a
TV. This may cause distortion of the colors in the
TV screen.
• Be sure to connect both left and right surround
speakers. Otherwise, the sound will not be heard.

Connecting a VCR

Make sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected VCR, hold down FUNCTION and
press when the power is turned off. This
switches the "MD" function to "VIDEO".
Once you enable the "VIDEO" function, just
press FUNCTION repeatedly until "VIDEO"
appears.
To the audio output of the VCR
Note
If the sound is distorted when selecting "VIDEO",
or you want to switch back to "MD", repeat the
operation described above for switching to
"VIDEO".