Advertisement
OL-V323-2 Installation Guide
10 Point Touch Overlay for the V323-2
Install the four (4) bezel retention "L" brackets on the top and bottom of the overlay.
6.6
NOTE: ENSURE YOU INSTALL THE BRACKETS IN THE SAME LOCATION THEY WERE
REMOVED FROM TO SECURELY MOUNT THE OVERLAY.
6.6.1
Slide the bezel retention bracket from the rear of the monitor between the bottom of the monitor
and the touch frame bezel.
6.6.2
Align the bracket screw hole with the bezel. Attach the bezel retention bracket to the bezel with
the 6-32 x 3/8" undercut screws previously removed in Step 6.3.
6.6.3
Repeat for remaining three (3) brackets.
6.7
Connect the touch screen USB cable to the PC / media player providing video to the display.
6.8
Installation is complete.
www.necdisplay.com
NEC Display Solutions of America, Inc.
OL-V323-2
Rev.1.2
4
Advertisement
