Changing The Spectrum Analyzer Display; Adjusting The Brightness Of The Front Panel Display - Sony MHC-GNV111D Operating Instructions Manual

Changing the spectrum
analyzer display
Use buttons on the unit for the operation.
1
Press AMP MENU repeatedly to select
"SPECTRUM".
The last selected spectrum setting appears
in the display.
2
Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
The display changes as follows:
T
SPECTRUM 1
Y
SPECTRUM OFF
R
t
3
Press ENTER.
MHC-GNV111D only
When X-ROUND mode is selected
1
Press AMP MENU repeatedly to select
"X-POSITION".
The last selected spectrum setting appears
in the display.
2
Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
The display changes as follows:
X-POS ON* y X-POS OFF
*The spectrum analyzer display will synchronize
with the selected X-ROUND effect.
3
Press ENTER.
GB
80
t
SPECTRUM 2
Y
SPECTRUM 3
R
T
SPECTRUM 4
Adjusting the brightness
of the front panel display
Use buttons on the unit for the operation.
1
Press AMP MENU repeatedly to select
"DIMMER".
The last selected dimmer setting appears in
the display.
2
Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
The display changes as follows:
t
DIMMER 1
t
DIMMER OFF
3
Press ENTER.
y T
DIMMER 2
T