Locating A Particular Point In A Track; Playing Tracks Repeatedly - Sony MDS-JB920 Operating Instructions Manual

Playing MDs
Locating a Particular Point in a
Track
You can also use the 0 and ) buttons to locate a
particular point in a track during playback or playback
pause.
To locate a point
While monitoring the
sound
Quickly by observing
the display during
playback pause
z
If "—Over—" appears while you are pressing )
during playback pause
The disc has reached to its end. Press 0 (or =) or
turn AMS counterclockwise to go back.
Notes
• If the disc reaches the end while you are pressing )
during sound monitoring, the deck stops.
• Tracks that are only a few seconds long may be too short
to scan using the search function. For such tracks, it is
better to play the MD at normal speed.
26 EN
0/)
0 )
§ ·
P
Press
) (forward) or 0 (backward) and
keep pressing until you find the point.
) or 0 and keep pressing until
you find the point. There is no sound
output during this operation.

Playing Tracks Repeatedly

You can play tracks repeatedly in any play mode.
REPEAT
Press REPEAT.
r
p
"REPEAT" appears in the display.
The deck repeats the tracks as follows:
When the MD is played in
Normal play (page 11)
Shuffle Play (page 27)
Program Play (page 28)
To cancel repeat play
Press REPEAT several times until "REPEAT"
disappears.
The deck returns to the original playing mode.
Repeating the current track
While the track you want to repeat is playing in
normal, Shuffle, or Program Play, press REPEAT
several times until "REPEAT 1" appears in the display.
0 ) r
§ ·
P p
The deck repeats
All the tracks
All the tracks in random order
The same program