Warranty - HE PARAMOTORES MVL 125 User Manual

than 1 mm per adjustment. After each adjustment you can try to start the engine and
check the result.
If the engine does not start well then it usually means the belt is still too loose and is
slipping, in this case repeat the operation by tensioning the belt another 1 mm.
Consider that if the belt slips a little, but the engine still starts fine, then the tension is
correct. Belt tension always increases automatically when the engine is running
because of thermal expansion in the pulleys.
Once you have found the correct tension, do not adjust it any more. In case of doubts
please contact your paramotor dealer – or the HE team.
To adjust the belt do the following:
o Loosen the cam of pulley bolt located, once this is loosened then you can turn the
cam with a
n.27 mm size wrench - careful to observe the 1 mm increments.
o Once you have finished turning the cam remember to re-tighten the safety bolts at
2,5 kg. ( 25 Nm), first the back bolt, by keeping firm the cam with the wrench, and
then the side bolt.
IGNITION

In case the coil and/or the handwheel must be changed, it is compulsory to turn to your
dealer or to trained personnel, even if this operation can appear simple at the first
sight, since the timing of the engine, if wrong, can change the performance and cause
damage to the engine. To check the timing: the distance between the coil and the
flywheel magnet is 0,4-0,5 mm.

WARRANTY


Warranty includes spare parts and labor, transport excluded.
For any defective part, please contact your reference authorized dealer or HE
directly, so that you can get proper indications about how to handle it.
DURATION OF WARRANTY
1 YEAR beginning from the date of purchase from PARAMOTORES HE.
WARRANTY IS VOID IN THE FOLLOWING SITUATIONS:
 Alterations to the engine not approved by PARAMOTORES HE.
 Wear & tear of components of the engine due to the instructions within
the product manual not being adhered to.
USER'S MANUAL MVL ENGINE 2019
10