Specifications - Sony LBT-D390 Operating Instructions Manual

Specifications

For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
70 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
(LBT-D390/D790/G5500)
Continuous RMS power output
Total harmonics distortion
(LBT-XB50)
DIN power output (Rated)
Continuous RMS power output (Reference)
Music power output (Reference)
(LBT-XB60)
DIN power output (Rated)
Continuous RMS power output (Reference)
Music power output (Reference)
(LBT-XB33/XB33K)
The following measured at AC 120/240 V, 50 Hz
DIN power output (Rated)
Continuous RMS power output (Reference)
Peak music power output (Reference)
120 + 120 watts
(8 ohms at 1 kHz, 10%
THD)
Less than 0.07%
(8 ohms at 1 kHz, 50 W)
80 + 80 watts
(8 ohms at 1 kHz, DIN)
100 + 100 watts
(8 ohms at 1 kHz, 10%
THD)
170 + 170 watts
(8 ohms at 1 kHz, 10%
THD)
100 + 100 watts
(8 ohms at 1 kHz, DIN)
120 + 120 watts
(8 ohms at 1 kHz, 10%
THD)
210 + 210 watts
(8 ohms at 1 kHz, 10%
THD)
100 + 100 watts
(6 ohms at 1 kHz, DIN)
120 + 120 watts
(6 ohms at 1 kHz, 10%
THD)
1,500 watts
(LBT-XB44/XB44K)
The following measured at AC 120/240 V, 50 Hz
DIN power output (Rated)
Continuous RMS power output (Reference)
Peak music power output (Reference)
(LBT-XB66/XB66K/XB660)
The following measured at AC 120/240 V, 50 Hz
DIN power output (Rated)
Continuous RMS power output (Reference)
Peak music power output (Reference)
Inputs
PHONO IN (phono jacks):
MIX MIC (phone jack):
(LBT-D390/D790/G5500)
VIDEO (AUDIO) IN (phono jacks):
(LBT-XB33/XB33K/XB44/XB44K/XB50/XB60/
XB66/XB66K/XB660)
VIDEO/MD (AUDIO) IN (phono jacks):
Outputs
PHONES (stereo phone jack):
(LBT-XB33/XB33K/XB44/XB44K/XB50/XB60/
XB66/XB66K/XB660)
VIDEO/MD (AUDIO) OUT (phono jacks):
SPEAKER:
(LBT-D390/D790/G5500/XB50/XB60/XB66/
XB66K/XB660)
(LBT-XB33/XB33K/XB44/XB44K) accepts
SURROUND SPEAKER
(LBT-D790/XB33/XB33K/XB50/XB60 only)
120 + 120 watts
(6 ohms at 1 kHz, DIN)
140 + 140 watts
(6 ohms at 1 kHz, 10%
THD)
2,000 watts
140 + 140 watts
(8 ohms at 1 kHz, DIN)
170 + 170 watts
(8 ohms at 1 kHz, 10%
THD)
3,000 watts
sensitivity 3 mV,
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
sensitivity 250 mV,
impedance 47 kilohms
sensitivity 250 mV,
impedance 47 kilohms
accepts headphones of 8
ohms or more
voltage 250 mV,
impedance 1 kilohm
accepts impedance of 8 to
16 ohms.
impedance of 6 to 16
ohms.
accepts impedance of 16
ohms
43